Bingham Pump Parts by KLD Pumps

KLD Pumps provides aftermarket Bingham pump parts for Sulzer Bingham centrifugal pumps, used since the early 20th century in mining, chemical processing, and water treatment. Based in Southeastern Idaho, KLD Pumps offers parts that meet or exceed OEM standards, built on our experience in the phosphoric acid industry. Learn more on our homepage or contact us.

Key Features: Parts cost 20-30% less than OEM, are delivered quickly, and include a 1-year warranty.

Why KLD for Bingham Pump Parts?

With over 100 years of expertise in extreme-duty applications, KLD Pumps crafts parts suited to Bingham’s challenging conditions:

• Precision Fit: Parts match Bingham specs (e.g., MSE, MSD Series) with ±0.001-inch tolerances.
• Materials: CD4MCuN pump parts (25% Cr, 5% Ni, PREN > 40) and Duplex Stainless Steel pump parts (ASTM A890 Grade 5A) provide 100 ksi strength for pH 2-10 fluids and 40% solids slurries.
• Customization: 3D scanned pump parts (0.005-inch accuracy) fit legacy Bingham pumps, improving flow by up to 10%.
• Service: Quotes in 24 hours, fast production—text or call us via our homepage or contact page.

All parts come with a 1-year warranty against defects.

Visual Suggestion: Add a ‘Technical Highlights’ box with “100 ksi strength” and “0.001-inch precision.”

Bingham Pump Parts Offered

Here’s what we provide to keep Bingham pumps running in tough environments:

Visual Suggestion: Add a Bingham pump diagram highlighting these parts.

Parts for Bingham Models

We offer aftermarket parts for these Sulzer Bingham centrifugal pumps, built for extreme-duty applications:

• MSE Series (e.g., MSE 2x4x8.75):
  • Specs: Multi-stage, flows to 1,500 gpm (340 m³/hr), heads to 2,000 ft (610 m), pressures to 350 psig, temps to 500°F (260°C), discharge 4-6 in., power up to 150 HP.
  • Materials: High-Chrome Iron (>600 BHN), Duplex SS (70 ksi)—KLD’s CD4MCuN (PREN > 40, 100 ksi yield) adds durability.
  • Conditions: pH 2-10 (e.g., phosphoric acid), 20-40% solids (e.g., mining ore), viscosities to 500 cP.
  • Applications: High-pressure water transfer (e.g., municipal systems), boiler feed (e.g., power plants), industrial cooling (e.g., refineries).
  • KLD Parts: Impellers reach 85% efficiency, casings resist 20,000 ppm Cl⁻, wear rings extend MTBR by 6 months in abrasive conditions.
• MSD Series (e.g., MSD 4x8x10.5):
  • Specs: Multi-stage, flows to 2,500 gpm (568 m³/hr), heads to 1,500 ft (457 m), pressures to 350 psig, temps to 500°F (260°C), discharge 6-8 in., power up to 200 HP.
  • Materials: Cast Iron (25 ksi), 316 SS (PREN ~25)—KLD’s Duplex SS increases fatigue strength by 20% (100 ksi yield).
  • Conditions: pH 3-9 (e.g., chemical slurries), 30-50% solids (e.g., tailings), viscosities to 750 cP.
  • Applications: Mining slurry pumping (e.g., ore processing), chemical processing (e.g., acid transfer), water treatment (e.g., high-flow filtration).
  • KLD Parts: Shafts hold 0.001 TIR at 350 psig, seals limit leakage to <0.1 oz/hr, bearings support 200 HP loads.
• AH Series (e.g., AH 4/3):
  • Specs: Single-stage slurry, flows to 1,000 gpm (227 m³/hr), heads to 200 ft (61 m), pressures to 200 psig, temps to 300°F (149°C), discharge 3-4 in., power up to 100 HP.
  • Materials: High-Chrome Iron (>600 BHN), 316 SS—KLD’s CD4MCuN improves corrosion resistance.
  • Conditions: pH 3-10 (e.g., acidic runoff), 40-60% solids (e.g., sand slurry), viscosities to 400 cP.
  • Applications: Mining tailings, dredging operations, industrial slurry transfer.
  • KLD Parts: Impellers resist 60% solids abrasion, wear rings reduce wear by 40%, casings handle pH 3 fluids.

Need help? Visit our homepage or contact page to text or call.

KLD Aftermarket vs. OEM

Here’s how KLD’s aftermarket Bingham pump parts compare:

Example: “KLD’s impeller increased our MSE Series uptime by 30%.” – Mining Engineer

About Bingham Pumps and KLD

Sulzer Bingham pumps, dating back to the early 20th century, are known for rugged centrifugal designs in mining, chemical, and water treatment industries. Acquired by Sulzer in 2016, they perform in high-pressure applications. KLD Pumps supports this legacy with aftermarket parts for that brand, using Idaho’s phosphoric acid industry know-how and advanced materials.

Order Bingham Pump Parts

To get aftermarket Bingham pump parts:

• Specify your model (e.g., MSD 4x8x10.5) and needs (flow, fluid type).
• Text or call us via our homepage or submit details on our contact page with serial number.
• Get a quote in 24 hours and parts delivered fast.

Contact Us: Visit our homepage or contact page to text or call.

Visual Suggestion: Add a ‘Request Quote’ button.

Support and Resources

For Bingham pump owners:

• Maintenance Tips: Check seals every 1,500 hours, lubricate bearings monthly.
• Part Selection Guide: Coming soon—compare options.
• Case Study: “KLD’s wear rings improved our MSD Series uptime by 25%.”

More at kldpumps.com.

FAQs

• Compatible with all Bingham models? Yes, including MSE, MSD, AH Series.
• Warranty? 1-year against defects.
• Lead time? Faster than OEM—text or call via our contact page.
• Custom parts? Yes, via 3D scanning.